METRO SUPPLY COMPANY - "A Supplier of Mechanical and Acoustical Insulation Products"

NEW JERSEY:  (973)-237-1551 
NEW YORK:   (718)-383-0117
VIRGINIA:       (571)-667-6366

BOSS FIRESTOPPING PRODUCTS

METRO SUPPLY COMPANY IS A STOCKING DISTRIBUTOR OF BOSS SOUDAL FIRESTOPPING

Soudal Boss Products Logo

FIRESTOP FOAMS

Firestop Foams

BOSS 813 FIRESTOP FOAM
BOSS 812 FIRE BLOCK FOAM

FIRESTOP CAULKS

Firestop Caulks

BOSS 810 NON-INTUMESCENT
BOSS 814 FIRESTOP CAULK

SPRAY FIRESTOP

Spray Firestop

BOSS 136 FIRE BLOCK SEALANT
BOSS 333 STRAW FOAM

HI-TEMP CAULKS

Hi Temp Caulks

BOSS 139 HI-TEMP MORTAR
BOSS 350 FIRE DUCT SEALER
BOSS 760 SILICONE FIRESTOP


Firestop Foam

BOSS 813 FIRESTOP FOAM

BOSS 813 can be used on any commercial or residential construction where the code calls for a UL system for penetration of cables, etc. through drywall, concrete or wood. (Please consult the UL directory for a full list of approved systems). BOSS 813 can also be used as a fireblock/draftstop in non-fire rated construction. BOSS 813 prevents the spread of fire, smoke and toxic gasses from one compartment to another, while still maintaining the integrity of the Firewall. BOSS 813 has excellent insulation and acoustic properties, and is also paintable (after inspection).

BOSS 813 meets or exceeds all building codes including the new International Building Code. BOSS 813 has been tested to ASTM E-814 , UL 1479 and ASTM E-84. BOSS 813 has been tested as a Through Penetration Firestop for 1 & 2 hour fire rated construction. BOSS 813 must be installed as tested to achieve a 1 or 2 hour rating.

*MEETS ASTM E-814

FEATURES:

  • Will adhere to almost any substrate
    • Drywall walls/floors
    • Concrete walls/floors
    • Wood walls/floors
  • Installed in seconds, reducing labor cost by up to 90%
  • Ideal for hotels, hospitals, prisons, condominiums, single and two family homes
  • Paintable
  • Can be used on vertical or horizontal applications
  • Excellent acoustic and thermal insulation
  • Unaffected by moisture or humidity after curing
  • CFC Free

PDF Viewer


Straw Foam Grade

BOSS 812 FIRE BLOCK STRAW FOAM GRADE

BOSS 812 Fire Block Foam prevents the spread of smoke and toxic gasses from one compartment to another, thereby slowing down the spread of fire, due to lack of air to fuel the flames.

BOSS 812 has excellent insulation and acoustic properties and is also paintable (after inspection). BOSS 812 has been tested to ASTM E-84 and UL 723.

BOSS 812 Fire Block foam is a popular product for sealing small holes and gaps in residential wood structure construction.

*Please note that BOSS 812 does not meet ASTM E-814 like BOSS 813.

FEATURES:

  • Will adhere to almost any substrate
  • Can be used to seal around copper, PVC pipes conduits and large spaces left after the installation of waste pipes, ducting, etc.
  • Prevents the spread of smoke and toxic gasses
  • Installed in seconds, reducing labor cost by up to 90%
  • Ideal for single and two family homes
  • Paintable (after inspection)
  • Specialized 360° Dispensing Can
  • Excellent acoustic and thermal insulation
  • Unaffected by moisture or humidity after curing
  • CFC Free
  • Very cost effective
  • Reduces energy costs
  • Prevents intrusion of insects and pests

PDF Viewer


Foam

BOSS 333 TRIPLE EXPANDING STRAW FOAM

BOSS 333 is a ready-to-use, multi-purpose, polyurethane foam that expands to three times its original volume on contact with air. The expanding action fills holes, cracks and gaps more completely than standard caulks. BOSS 333 has excellent insulating properties and superb adhesion to virtually all building materials.

FEATURES:

  • Easy-to-use, multi-purpose urethane foam
  • Unlike ordinary sealants, it expands three times its original volume
  • Adheres to all building materials except PTFE, silicone and polyethylene
  • Seals by expanding into gaps, cracks and crevices
  • Uses include insulating, sealing and filling gaps around pipes, plumbing fixtures, ductwork and foundations
  • UL Classified

PDF Viewer

TRIPLE EXPANDING STRAW FOAM Use


Firestop Sealant

BOSS 814 INTUMESCENT FIRESTOP SEALANT

In the event of a fire, BOSS 814, a one-part, elastomeric, intumescent firestop sealant will expand to form an insulating char that prevents the spread of fire, smoke and toxic gases through construction openings.  Formulated with non-combustible, inorganic materials.

BOSS 814 remains flexible when cured, making it ideal for both horizontal and vertical joints that are subject to vibration or dynamic movement. With its excellent adhesion properties, it is particularly suited for sealing walls and floors that have been penetrated by pipes, conduits and electrical cables in all types of construction.  BOSS 814 can also be used to fill interior voids around HVAC, plumbing and framing.

BOSS 814 Intumescent Latex Firestop Sealant meets or exceeds ASTM E-814 (UL 1479) and meets the criteria for fire/smoke/draft stop for BOCA, CABO, UBC, SBCCI, IRC and the 2003 International Building Codes.

The product is very easy to apply using a standard caulking gun or trowel and cleans up with water, prior to curing.  It can be used for interior or exterior applications and can be painted (after inspection).

BOSS 814 is available in 10.1 Fl. Oz. and 28 Fl. Oz. cartridges, 5 gallon pails, 20 Fl. Oz. sausages, and 11 Oz. Net Wt. aerosol cans.

PDF Viewer


Draft Stop Sealant

BOSS 136 FIRE BLOCK DRAFT STOP SEALANT

BOSS 136 Fireblock sealant is a one-part, non-combustible filler caulk which is an ideal product for residential construction and meets all sections of the newly adopted International Residential Building Code.  BOSS 136 has adhesion properties which are superior to other products on the market.  The sealant literally sticks to the most common construction materials and is semi-flexible. 

BOSS 136 is for interior use only, and is particularly suited for sealing walls and floors which have been penetrated by pipes, conduits or electrical cables, and for filling interior voids around HVAC, plumbing and framing.

Meets and exceeds the specifications for ASTM E-136 and conforms to all National Building Codes, including BOCA, CABO, SBCCI, ICBO, NFPA and the 2003 International Building Codes. It is the most versatile firestop product available in today's marketplace.

PDF Viewer


Fire Mortar

BOSS 139 HI-TEMP FIRE MORTAR

BOSS 139 Hi-Temp Fire Mortar is a non-combustible silicate cement for use in temperature ranges from 0°F - 800°F.
BOSS 139 is formulated for repairing chimneys, fireplaces, and sealing wood-burning stoves and appliances.

BOSS 139 offers excellent adhesion and sets to become rock hard when cured.  This sealant can also be used on wood frame construction where a non-combustible sealant is required.

FEATURES:

  • Conforms to ASTM E-136
  • Handles Temps up to 800°F
  • No asbestos fillers
  • VOC Compliant

PDF Viewer


Duct Seal

BOSS 350 FLAME RETARDANT DUCT SEAL

BOSS 350 Flame Retardant Duct Sealant is high performance, flame retardant duct sealant designed for use in high, medium or low velocity heating and air conditioning systems.

BOSS 350 provides excellent strength, flexibility and resistance to heat and cold, forming a seal against air leakage. BOSS 350 Flame Retardant Duct Sealant cures to a tough, tackfree, flexible sealant and remains flexible at low and high temperatures. To be used in conjunction with metal fasteners to hold assembly together.

  • Tested to UL 723
  • Can be used on ductwork seams and sealing pipe joints

PDF Viewer


Boss 760 Silicone Firestop

BOSS 760 SILICONE FIRESTOP

BOSS 760 Firestop Silicone is a single part, low modulus neutralcure silicone firestop. BOSS 760 will prevent the spread of toxic gasses, smoke and fire. BOSS 760 is not affected by UV radiation, will not crack, and is capable of sustaining constant vibration and seismic and thermal shock.

FEATURES:

  • PreventS the spread of toxic gases, smoke and fire through construction openings
  • Suitable for use around fire dampers, sealing pipes, conduits and electrical cables
  • For interior/exterior use
  • Will not crack
  • Listed to ASTM E-814 (UL 1479)

BOSS 760 has been tested to ASTM E-814 (UL 1479) and meets the criteria for fire/smoke/draft stop for BOCA – CABO – UBC –SBCCI – IRC – IBC.

PDF Viewer


Boss 810 Non Intumescent Firestop

BOSS 810 NON-INTUMESCENT FIRESTOP

BOSS 810 Non-Intumescent Latex Firestop Sealant is a single part, acrylic, multi-purpose non-intumescent firestop sealant that will prevent the spread of toxic gases, smoke and fire.

BOSS 810 is extremely flexible and is ideal for both horizontal and vertical joints subject to vibration or dynamic movement. BOSS 810 adheres to almost any surface. It can be used for interior or exterior applications, and can be painted (after inspection). BOSS 810 has been tested to ASTM E-814 (UL 1479) and meets the criteria for fire/smoke/draft stop for BOCA – CABO – UBC – SBCCI – IRC – IBC.

FEATURES:

  • Listed to UL 1479 (ASTM E-814)
  • Flexible when cured
  • Product of choice for sealing walls and floors which have been penetrated by pipes, conduits and electrical cables in all types of construction, as well as filling interior voids around HVAC, plumbing and framing
  • Water clean up
  • Suitable for interior or exterior applications
  • Paintable after inspection

PDF Viewer